info@amperis.com (+34) 982 20 99 20
Multi-Voltage, Multi-Capacity, Multi-Chemistry.
The MHF is a revolutionary traction battery charger, designed for conventional, opportunity and rapid charging applications.
It is based on a new hybrid power conversion technology, featuring an unprecedented combination of very high efficiency, unity power factor (PFC), universal capabilities and precise charge control.
This system offers very high electrical efficiency, near unity power factor and very low output current ripple, moreover it features a real universal charging capability: multivoltage, multi-current, multi-application.
The two parts that are combined together to compose this "Hybrid" system are:
The charging curve is programmable for any battery type, including Lithium technologies.
When used with Lead-Acid batteries, the ultra-filtered output current and the unique control algorithm ensure a perfect mixing of the electrolyte (without using air-pumps), while reducing the water consumption and the temperature rise of the battery, as well as the energy consumption.
The MHF is controlled by the new digital board Amperis, equipped with alphanumeric display & keyboard, Charge History Logger, Programmable Real-Time Clock and Calendar, Audible Alarm and Connectivity package, compatible with wireless Battery Identification Modules, and the WEB based Fleet Management System DoctorFleet.com.
With the control board G-01, the programmable features of these chargers are almost infinite.
MODELS |
Universal charger MHF |
AC INPUT |
|
TYPE |
Universal battery charger MHF |
STANDARD VOLTAGES |
Single-phase 220-230-240 VAC ± 10% |
EFFICIENCY |
>90% (*) |
POWER FACTOR |
Single-phase models >90% (*) |
DC OUTPUT |
|
STANDARD VOLTAGES |
Nominal battery voltages from 24V to 120 VDC. |
CURRENT RATINGS |
From 60A to 600A. |
CHARGING CURVE |
Completely programmable, can support batteries of any type, voltage, capacity. |
PROTECTION |
|
WRONG BATTERY |
If the battery voltage is outside the acceptable limits, or the polarity is reversed, the charger remains in stand-by mode and gives error/warning message. |
ELECTRONIC OVERLOAD PROTECTION |
Complete protection in case of output short circuit or overload. |
ANTI-ARCING |
WITHOUT AUXILIARY WIRES: When the battery is connected, no arcing is generated at the connectors. If the battery is disconnected while it's being charged, arcing is possible, so it's necessary to turn off the charger before to disconnect the battery. |
POWER-ON SELF-TEST |
Every time the unit is powered, an automatic self-test of the power electronics and the control boards is executed in less than 10 seconds. In case of fault, the unit remains in safe stand-by mode and gives fault messages. |
AUTOMATIC SHUTDOWN ON BATTERY DISCONNECTION |
If the battery is disconnected while the charge is in progress, the charger turns-off automatically within 3 seconds and a specific message is saved in the Charge History Log. |
SAFETY TIMER |
An independent safety timer turns the charger off in case of malfunction of the main control unit. |
MECHANICAL AND ENVIROMENTAL |
|
DIMENSIONS |
Cabinet A: 500x 900 x 440 (mm) |
ENCLOSURE |
Stainless Steel front and upper panel |
COOLING |
FORCED VENTILATION with active fan control |
NOISE |
<65 dBA at 1 meter |
ENVIROMENTAL PROTECTION |
IP21 (Standard) |
AMBIENT TEMPERATURE |
OPERATION: -10 / +50 °C |
ALTITUDE |
<2000m |
USER INTERFACE AND CONNECTIVITY |
|
USER INTERFACE |
Alphanumeric LCD Display + LEDs, membrane keyboard and Audible Alarm. |
CONNECTIVITY |
Dual RS-485 port for daisy chain interconnection, compatible with WEB based Fleet Management System (DoctorFleet.com) |
STANDARDS |
|
MARKING |
CE |
EMC |
IEC EN 61000-6-2, IEC EN 61000-6-4 |
SECURITY |
IEC EN 50178, IEC EN 62040-1 |
PERFORMANCE TEST |
IEC EN 62040-3 |
NORTH AMERICAN STANDARDS |
UL 1564 ``Industrial battery chargers´´ |
NOTES
(*) = Reported Efficiency and Power Factor values are AVERAGE values, measured over the entire charging cycle. Peak Efficiency and Power Factor are higher.
ORDERING INFORMATION: AMPERIS BATTERY CHARGERS |
|
MODEL: |
i.e. MMF |
MAINS: |
i.e. 3x220V 60Hz |
NOMINAL BATTERY VOLTAGE: |
i.e. 180V |
MAX Nº CELLS: |
i.e. 90 Cells |
GASSING VOLTAGE PER CELL: |
i.e. 2.4V/ Cell |
MAX VOLTAGE PER CELL: |
i.e. 2.75 V/ Cell |
MAX OUTPUT VOLTAGE: |
i.e. 2.75X90= 250 V |
MAX OUTPUT CURRENT: |
i.e. 160 A@216V (Gassing voltage) |
Do you want to buy high quality Battery chargers?
Inquire for our Battery chargers prices.
Do not hesitate to contact us, call us today by phone (+34) 982 20 99 20. We are happy to help you.